Electrical Panel Upgrade in Aurora
Check available electrical capacity before adding a charger at your Aurora home. A full panel or 100-amp service does not automatically mean an upgrade; the contractor compares current limiting, approved load management and service work.
Plenty of older Aurora homes, especially around Regency Acres and the streets near Aurora Village, were built with 100-amp service that is already close to maxed out. Adding a 240-volt charger to a panel like that can trip breakers or simply leave no room, so your contractor should check your available capacity during the quote and tell you whether an upgrade is genuinely needed or not.
When it is, your contractor should upgrade the service, coordinate the meter work with Alectra Utilities, and pull the permit for the panel and the charger together. Doing both at once avoids a second inspection and a second service call, which keeps the cost and the disruption down.
Aurora's older neighbourhoods are where panel conversations happen most. Homes near Aurora Village and Regency Acres were built when 100-amp service was generous, and decades of additions, central air, finished basements, bigger kitchens, have eaten the spare capacity a charger needs. The load calculation tells the contractor exactly where you stand, and your contractor should show you the numbers rather than asking you to take the contractor's word for it. If an upgrade is the right call, your contractor should fold it into the charger job: one permit, one ESA inspection, and coordination with Alectra Utilities for the meter and service side, so you are not managing two projects. If the calculation says your panel can carry the charger as-is, your contractor should say that too, even though it is the smaller job for the contractor. Either way, the answer comes from the math, not from what equipment happens to be available.
A timer or app schedule controls when charging starts. It is different from an approved EV energy management system that monitors household demand. A Licensed Electrical Contractor confirms capacity, any required monitoring equipment and the allowed charging current.
- Load calculation to confirm what you actually need
- 100-amp to 200-amp service upgrades
- Alectra Utilities coordination for meter work
- Permit and inspection for panel and charger together
- Honest call on whether an upgrade is required
- New breakers and clear labelling left behind
Useful guides: Do Aurora Homes Need Panel Upgrades for EV Chargers? | EV Charger Installation Cost in Aurora
Ready to start? Get A Free Quote through Aurora EV Charger Pros. The service provider confirms availability, the contractor, written scope, pricing and any permit or inspection responsibilities before work is agreed.